复合材料面内剪切Iosipescue方法分析及试验研究

讨论了采用双Ｖ形开槽试样的Ｉｏｓｉｐｅｓｃｕ剪切试验方法的应用，分析了影响试验的因素，对Ｔ３００／５２２２复合材料单向板及π／４多向铺层层合板进行了试验研究。试验结果表明，此方法可以很好地用于复合材料剪切试验。     

基于LabVIEW设计曲线拟合仪

基于LabVIEW图形化编程环境和软件分析库函数设计的曲线拟合仪，界面友好，功能齐全，操作简便，在科学研究和工程应用中具有较强的实用价值。文中简要介绍利用NI虚拟仪器技术设计曲线拟合仪的方法，给出软件设计思想与实现方案，对主要软件功能模块进行了分析。     

波导分支线定向耦合器计算方法

利用模匹配方法和网络理论分析计算了一种卫星天线系统中常用的波导分支线定向耦合器,计算结果与实验结果非常吻合。该方法为波导分支线定向耦合器提供一种有力的设计手段。它可直接用于设计Ku 波段通信卫星天线的波束形成网络,也可以用来设计各种耦合度的波导分支线定向耦合器。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

空间能量粒子探测方法研究

阐述了空间能量粒子探测的原理和方法。介绍了国外在能量粒子探测方面所采用的半导体望远镜测量法、电场加速法、磁偏转法等方法，分析了它们各自的优缺点。就制约能量粒子探测技术发展的关键因素进行了讨论。并以此为基础，结合我国实际情况提出了一种新的探测方法。     

掠海飞行导弹击水概率的仿真研究

本文对掠海导弹的击水概率问题进行了研究,提出了用均匀设计、Monte—Carlo法和逐步回归法建立击水概率预报公式的仿真方法,并结合某型号的反舰导弹进行计算,得到了满意的结果。本文还利用表观频率和表观频谱的概念,建立起飞航导弹的背景干扰——海浪和阵风的数学模型,并用波叠加法进行了数字仿真。     

Double-decoupled inverse design of natural laminar flow nacelle under transonic conditions

The inverse design based on the pressure distribution is an essential approach to realize the improvement of Natural Laminar Flow(NLF) performance for nacelles. However, the direct definition of target pressure distribution at design point is challenging for the dilemma to consider the constraints of shock wave and laminar flow at the same time. In addition, the universality of method will be limited when the inverse design is strongly coupled with the solver. Thus, a double-decoupled methodolog...     

航空鼓形花键设计及其不对中接触特性

针对鼓形花键设计方法不完善、修形量范围无法确定的问题,提出利用花键齿面许用应力与内外花键配合干涉确定鼓形花键鼓形量的范围。以某航空发动机中央传动杆花键为例,开展鼓形花键设计;进而对比研究对中与不对中状态下普通花键和鼓形花键的接触特性。结果表明:对中状态下,普通花键接触应力集中于齿向加载端,而鼓形花键则集中于齿向中部且接触应力增大;不对中状态下,普通花键接触齿对数目显著减小且接触应力显著提高,而鼓形花键的均载性显著且接触应力降低;随着不对中的增大,普通花键因干涉而存在断齿风险,而鼓形花键仍能够啮合但脱开齿对数目增加,接触应力也急剧提高。所确定的鼓形花键修形量范围合理,能够将齿侧间隙、不对中补偿能力、与修形量定量耦合起来,为航空鼓形花键设计、不对中控制、承载能力与寿命提升提供了重要理论参考。      

基于叶端定时的转子叶片动应变重构不确定性量化

基于叶片非接触式动应变重构理论,开展动应变重构不确定性量化方法研究。基于方差合成定理建立重构叶片动应变不确定性量化分析模型;以模拟转子叶片为研究对象,开展旋转叶片叶端定时试验,利用周向傅里叶算法获取不同叶端定时传感器布局下的测点振幅,通过最大熵方法拟合振幅分布概率密度函数,确定叶端定时测振的不确定性参数;结合Kriging代理模型和试验共振频率数据对叶片有限元模型进行修正,获取关键测点位移-应变转换因子,并获取考虑共振转速以及测点位置不确定性的转换因子不确定性参数;获取重构动应变的均值、标准不确定度和包含区间,与应变片测量数据作对比。结果表明,除5号叶片A测点外,测量动应变均位于重构动应变的95%置信度下的包含区间内,且所有叶片的应变片测点动应变重构误差不超过15%。     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient (STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternative time-clocking. With the time-clocking perspective, unsteady flow solutions from different passages of the same blade row are mapped to flow solutions of the same passage at different time instants or phase angles. Accordingly, the time derivative of the unsteady flow equation is discretized in time directly, which is more natural than transforming the time derivative to a spatial one as with the original STG method. To improve the solution accuracy, a ninth order difference scheme has been investigated for discretizing the time derivative. To achieve a stable solution for the high order scheme, the implicit solution method of Lower-Upper Symmetric Gauss-Seidel/Gauss-Seidel (LU-SGS/GS) has been employed. The NASA Stage 35 and its blade-count-reduced variant are used to demonstrate the validity of the time-clocking based passage reordering and the advantages of the high order difference scheme for the STG method. Results from an existing harmonic balance flow solver are also provided to contrast the two methods in terms of solution stability and computational cost.